Code-3 OsciLaser Retrofit Manuale Utente Scaricare il pdf

Contents:

Installation & Mounting ............................................ 2-3

Product Returns ....................................................... 4

OSCILASER

RETROFIT KIT

INSTALLATION

& OPERATION

MANUAL

Read all instructions and warnings before installing and using.

INSTALLER: This manual must be delivered to the end user of this equipment.

IMPORTANT:

OLKIT

1 2 3 4

OSCILASER 1
RETROFIT KIT 1
WARRANTY 4
PRODUCT RETURNS 4

Sommario

Pagina 1 - RETROFIT KIT

Contents:Installation & Mounting ... 2-3Product Returns ...

Pagina 2

2Remove the reflector fromcarriage (save the 2 1/4 inchhex screws) and discard.Cut gray ground wireand discard.Desolder both wires atmotor, discard gr

Pagina 3

3Install new reflector. Attachground jumper and positivefeed wire.Detail of solder joint showingdirection of wires.Note gap between ground wireand p

Pagina 4 - PRODUCT RETURNS

LP6000 and XL5000 are trademarks and ArrowStik is a registered trademark of Code 3, Inc. a subsidiary of PublicSafety Equipment, Inc.3M is a registere

Commenti su questo manuale

Nessun commento

Code-3 OsciLaser Retrofit Manuale Utente

Navigare online o scaricare Manuale Utente per Illuminazione Code-3 OsciLaser Retrofit. Code 3 OsciLaser Retrofit User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Illuminazione Code-3 OsciLaser Retrofit